View LC201V02-A3_4643011.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

product specification 1 / 26 lc201v02 liquid crystal display ver. 0.1 jan. 17, 2003 specification for approval 20.1 ? vga tft lcd title - model general buyer *when you obtain standard approval, please use the above model name without suffix lc201v02 *model a3 suffix lg.philips lcd co., ltd. supplier mnt/tv products engineering dept. lg. philips lcd co., ltd j.k choi / engineer prepared by j.t kim / manager reviewed by s.w lee / g.manager signature date approved by ) ) ( ( final specification preliminary specification ? please return 1 copy for your confirmation with your signature and comments. / / / signature date approved by
product specification 2 / 26 lc201v02 liquid crystal display ver. 0.1 jan. 17, 2003 contents 25 26 precautions 9 13 9 interface connections 3 - 2 color input data refernece 3 - 5 24 designation of lot mark 8 - 1 24 packing form 8 - 2 24 packing 8 23 emc 7 - 2 1 cover 2 contents 3 record of revisions 4 general description 1 5 absolute maximum ratings 2 6 electrical specifications 3 6 electrical charactreistics 3 - 1 11 signal timing specifications 3 - 3 12 signal timing waveforms 3 - 4 14 power sequence 3 - 6 15 optical sfecifications 4 19 mechanical characteristics 5 22 reliability 6 23 international standards 7 23 safety 7 - 1 page item no
product specification 3 / 26 lc201v02 liquid crystal display ver. 0.1 jan. 17, 2003 record of revisions added 7 - 1) safety d) 23/26 added 9 - 2. operating precautions 9) 25/26 changed mechanical drawing of lcd 20/26 changed mechanical drawing of lcd 21/26 changed contrast ratio,color coordinates,viewing angle revision 15/26 filled table 11. gamma scale specification 16/26 filled power consumption 6/26 filled power consumption 4/26 feb.17.2003 0.1 preliminary specification - dec.05.2002 0.0 description page revision date revision no
product specification 4 / 26 lc201v02 liquid crystal display ver. 0.1 jan. 17, 2003 1. general description lc201v02 is a color active matrix liquid crystal display with an integral cold cathode fluorescent lamp(ccfl) backlight system. the matrix employs a - si thin film transistor as the active element. it is a transmissive type display operating in the normally blac k mode. it has a 20.1 inch diagonally measured active display area with vga resolution (480 vertical by 640 horizontal pixel array) each pixel is divided into red, green and blue sub - pixels or dots which are arranged in vertical stripes. gray scale or the brightness of the sub - pixel color is determined with a 8 - bit gray scale signal for each dot, thus, a palette of more than 16,777,216 colors. it has been designed to apply the 8bit parallel cmos interface. it is intended to support lcd tv, pctv where high brightness, w ide viewing angle, high color saturation, and high color are important. general features surface treatment display operating mode weight power consumption viewing angle (cr>10) luminance, white color depth pixel format pixel pitch outline dimension active screen size hard coating(3h) & anti - glare treatment of the front polarizer transmissive mode, normally black 3,200 g (typ.) total 32.03 watt(typ.),(1.79watt@ v lcd ,30.24watt@450cd/[lamp=7ma]) viewing angle free [r/l 176(typ.), u/d 176(typ.)] 450 cd/m 2 (center 1 point (typ.)) 8 - bits,16,777,216 colors 640 horiz. by 480 vert .. pixels rgb stripe arrangement 0.6375mm x 0.6375mm 432(h) x 331.5(v) x 25.0(d) mm(typ.) 20.1 inches(510.54mm) diagonal 3 lamps / @21ma control circuit block power block vcom vgh vgl row driver circuit user connector cn1 cn2 cn3 cn4 cn5 3 lamps / @21ma r[0:7], g[0:7], b[0:7] dclk, hsync. vsync.,de column driver circuit tft - lcd 640xrgbx480 gamma reference circuit lamp ass ? y lamp ass ? y ? +12v
product specification 5 / 26 lc201v02 liquid crystal display ver. 0.1 jan. 17, 2003 2. absolute maximum ratings the following are maximum values which, if exceeded, may cause f aulty operation or damage to the unit. table 1. absolute maximum ratings note : 1. temperature and relative humidity range are shown in t he figure below. wet bulb temperature should be 39 c max, and no condensation of water. units 1 %rh 90 10 h op operating ambient humidity 1 %rh 90 10 h st storage humidity 1 c 60 - 20 t st storage temperature 1 c 50 0 t op operating temperature vdc +14.0 - 0.3 v lcd power input voltage max min parameter notes values symbol dry bulb temperature [ ? ]
product specification 6 / 26 lc201v02 liquid crystal display ver. 0.1 jan. 17, 2003 3. electrical specifications 3 - 1. electrical characteristics it requires two power inputs. one is employed to power the lcd e lectronics and to drive the tft array and liquid crystal. the second input power for the ccfl /backlight, is typically generated by an inverter. the inverter is an external unit to the lcds. table 2_1. electrical characteristics note : 1. the specified current and power consumption are under th e v lcd =12.0v, 25 2 c,f v =60hz condition whereas mosaic pattern(8 x 6) is displayed and f v is the frame frequency. 2. the current is specified at the maximum current pattern below 3. the duration of rush current is about 2ms and rising tim e of power input is 1ms(min.). 2 ma 205 178 - 1 watt 2.07 1.79 - p lcd power consumption 3 a 3.0 - - i rush rush current vdc 12.6 12.0 11.4 v lcd power supply input voltage 1 ma 172 149 - i lcd power supply input current module : parameter symbol max typ min notes unit values mosaic pattern(8 x 6) white : 255gray black : 0gray sub 1 dot pattern [ 255 0 255 ] / [ 0 255 0 ] r g b r g b r g b r g b r g b r g b r g b r g b (255) (0) (255) (0) (255) (0) (255) (0) (255) (0) (255) (0) (0) (255) (0) (255) (0) (255) (0) (255) (0) (255) (0) (255) maximum current pattern
product specification 7 / 26 lc201v02 liquid crystal display ver. 0.1 jan. 17, 2003 table 2_2. electrical characteristics note : the design of the inverter must have specifications for t he lamp in lcd assembly . the performance of the lamp in lcm, for example life time o r brightness, is extremely influenced by the characteristics of the dc - ac inverter. so all the parameters of an inverter should be care fully designed so as not to produce too much leakage current from high - voltage output of the inverter. when you design or order the inverter, please make su re unwanted lighting caused by the mismatch of the lamp and the inverter (no lighting, flicker, etc) n ever occurs. when you confirm it, the lcd ? assembly should be operated in the same condition as instal led in you instrument. ? do not attach a conducting tape to lamp connecting wire. if the lamp wire attach to a conducting tape, tft - lcd module has a low luminance and the inverter has abnormal action. because leakage current is occurr ed between lamp wire and conducting tape. 1. specified values are for a single lamp. 2. operating voltage is measured at 25 2 c. the variance of the voltage is 10%. 3. the voltage above v s should be applied to the lamps for more than 1 second for start - up. (inverter open voltage must be more than lamp starting voltage.) otherwise, the lamps may not be turned on. the used lamp current is the lamp typical current. 4. lamp frequency may produce interface with horizontal synchron ous frequency and as a result this may cause beat on the display. therefore lamp frequency sha ll be as away possible from the horizontal synchronous frequency and from its harmonics in order to pre vent interference. 5. let ? s define the brightness of the lamp after being lighted for 5 mi nutes as 100%. t s is the time required for the brightness of the center of the la mp to be not less than 95%. 6. the lamp power consumption shown above does not include loss of external inverter. the used lamp current is the lamp typical current. (p bl = v bl x i bl x n lamp ) 7. the life is determined as the time at which brightness of the lamp is 50% compared to that of initial value at the typical lamp current on condition of continuous operating at 25 2 c. 6 watt 33.27 30.24 p bl power consumption 1, 5 min 3 ts discharge stabilization time at 0 c at 25 c v rms 1,430 4 khz 60 50 40 f bl operating frequency 1, 3 vs established starting voltage v rms 1,100 1, 2 v rms 825(3ma) 720(7ma) 700(7.5ma) v bl operating voltage 1 ma rms 7.5 7.0 3.0 i bl operating current lamp : 1, 7 hrs 50,000 life time parameter symbol max typ min notes unit values
product specification 8 / 26 lc201v02 liquid crystal display ver. 0.1 jan. 17, 2003 i p i - p * asymmetry rate: | i p ? i ? p | / i rms x 100% * distortion rate i p (or i ? p ) / i rms 8. the output of the inverter must have symmetrical(negative and positive) voltage waveform and symmetrical current waveform (unsymmetrical ratio is le ss than 10%). please do not use the inverter which has unsymmetrical voltage and unsymmetrical curre nt and spike wave. requirements for a system inverter design, which is intended to have a better display performance, a better power efficiency and a more reliable lamp, are follow ing. it shall help increase the lamp lifetime and reduce leakage current. a. the asymmetry rate of the inverter waveform should be less than 10%. b. the distortion rate of the waveform should be within v 2 10%. * inverter output waveform had better be more similar to ideal s ine wave. 9. the inverter which is combined with this lcm, is highly r ecommended to connect coupling(ballast) condenser at the high voltage output side. when you use the inverter which has not coupling(ballast) condenser, it may cause abnormal lamp lighting because of biased mercury as time goes. 10.in case of edgy type back light with over 4 parallel lamps, i nput current and voltage wave form should be synchronized
product specification 9 / 26 lc201v02 liquid crystal display ver. 0.1 jan. 17, 2003 3 - 2. interface connections table 3. module connector(cn1) pin configuration - lcd connector(cn1):df9b - 41p - 1v (manufactured by hirose) or equivalent - mating connector : df9b - 41s - 1v (manufactured by hirose) or equivalent note: 1. nc: no connection. 2. all gnd(ground) pins should be connected together and to vss whi ch should also be connected to the lcd ? s metal frame. 3. all v lcd (power input) pins should be connected together. rear view of lcm 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 rbf dclk gnd hsync vsync gnd r0 r1 r2 r3 r4 gnd r5 r6 r7 g0 gnd g1 g2 g3 nc 1) dot clock system ground 2) horizontal sync vertical sync red data(lsb) system ground red data(msb) green data(lsb) system ground pin no symbol description 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 g4 gnd g5 g6 g7 b0 gnd b1 b2 b3 b4 gnd b5 b6 b7 gnd de gnd v lcd v lcd v lcd system ground green data(msb) blue data(lsb) system ground system ground blue data(msb) system ground data enable system ground power input(+12.0v) power input(+12.0v) power input(+12.0v) pin no symbol description 1 41 40 2
product specification 10 / 26 lc201v02 liquid crystal display ver. 0.1 jan. 17, 2003 table 4. backlight connector pin configuration(cn2,cn3,cn4,cn5) notes: 1. the high voltage power terminal is colored white,sky blue,gray. 2. the low voltage pin color is white,dark blue,black . lv hv lv nc hv hv symbol cn5 2 power supply for lamp 3(low voltage side) - white 2 1 power supply for lamp 3(high voltage side) - white 1 cn3 2 power supply for lamp 1(low voltage side) - black 4 nc 3 1 power supply for lamp 2(high voltage side) ? sky blue 2 1 power supply for lamp 1(high voltage side) - gray 1 cn2 notes description pin no 5 lv power supply for lamp 2(low voltage side) ? dark blue lv nc hv hv 2 power supply for lamp 6(low voltage side) - black 4 nc 3 1 power supply for lamp 5(high voltage side) - sky blue 2 1 power supply for lamp 6(high voltage side) - gray 1 5 lv power supply for lamp 5(low voltage side) - dark blue lv hv 1 power supply for lamp 4(high voltage side) - white 1 cn4 2 power supply for lamp 4(low voltage side) - white 2 2 2 cn 2 lamp1 lamp 2 cn 3 lamp 3 lamp 4 up side down side cn 4 cn 5 lamp 5 lamp 6 the backlight interface connector is a model bhsr - 02vs - 1(cn3/ cn4 ) and bhr - 05vs - 1(cn2/cn5) manufactured by jst. the mating connector part number are sm02b - bhss - 1 - tb(2pin), sm04(9 - e2)b - bhs - 1 - tb( 5pin) or equivalent. the pin configuration for the connector is show n in the table below.
product specification 11 / 26 lc201v02 liquid crystal display ver. 0.1 jan. 17, 2003 3 - 3. signal timing specifications table 5. timing table this is the signal timing required at the input of the user conn ector. all of the interface signal timing should be satisfied with the following specifications for it ? s proper operation. - - 3 t hi de hold time ns - - 3 t si de set up time v - - 0.7vcc v rh high input voltage 0.3vcc - - v rl low 3 t hd hold time for dclk ns 3 t sd set - up time data mhz 30 25 18 - frequency ns - - 10 t wch high duration 33 33 3 t vbp vertical back porch t hp 480 480 480 t vv vertical valid thp - thv - 150 - horizontal blank - 16 16 t hfp horizontal front porch tvp - tvv - 10 - vertical blank - 9 2 t vfp vertical front porch de (data enable) ntsc:57~63hz t hp t clk t clk 48 48 16 t hbp horizontal back porch hz 63 60 47 fv frequency 3 3 2 t wv width 96 96 16 t wh width t clk 850 800 790 t hp period hsync pal: 47~53hz t hp 560 525 490 t vp period vsync 640 640 640 t hv horizontal valid ns - - 10 t wcl low duration ns 55 40 33.3 t clk period dclk note unit max typ min symbol item note : hsync period and hsync w idth - active should be even number times of t clk . if the value is odd number times of t clk , display control signal can be asynchronous. in order to operate this lcm a hsync , vsync and de (data enable) signals should be used. 1. the performance of the electro - optical characteristics may be influenced by variance of the vertical refresh rates. 2. vsync, hsync should be keep the above specification. 3. hsync period, hsync width and horizontal back porch should be any times of a charac ter number (8).
product specification 12 / 26 lc201v02 liquid crystal display ver. 0.1 jan. 17, 2003 3 - 4. signal timing waveforms t hr , t vr t ir , t dr t hf , t vf t if , t df hsync, vsync, de, data t clkl t clk t wch t wcl t fclk t rclk t hd t sd v rh min. v rl max. t hi t si t hv t wh t hp t hfp t hbp t vp t wv t vbp t vfp de v sync de h sync v sync de dclk data (first/ second) h sync
product specification 13 / 26 lc201v02 liquid crystal display ver. 0.1 jan. 17, 2003 3 - 5. color input data reference the brightness of each primary color(red,green,blue) is based on the 8 - bit gray scale data input for the color; the higher the binary input, the brighter the color. the table b elow provides a reference for color versus data input. table 8. color data reference 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green (000) green 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 green (001) ... ... ... ... 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 green (254) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 green (255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red (000) red 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 red (001) ... ... ... ... 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 red (254) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 red (255) 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue (001) ... ... ... ... 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue (254) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue (255) blue (000) white yellow magenta cyan blue (255) green (255) red (255) black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 basic color 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 blue msb lsb green msb lsb red msb lsb b7 b6 b5 b4 b3 b2 b1 b0 g7 g6 g5 g4 g3 g2 g1 g0 r7 r6 r5 r4 r3 r2 r1 r0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue color input color data
product specification 14 / 26 lc201v02 liquid crystal display ver. 0.1 jan. 17, 2003 3 - 6. power sequence notes : 1. please avoid floating state of interface signal at invalid pe riod. 2. when the interface signal is invalid, be sure to pull down th e power supply for lcd v lcd to 0v. 3. lamp power must be turn on after power supply for lcd an inte rface signal are valid. s - - 1 t7 ms 100 - - t6 ms 50 - 0.5 t2 ms ms - - 200 t3 - - 200 t4 ms 50 - 0.5 t5 ms 10 - 0.5 t1 max typ min units values parameter interface signal (tx) power for lamp power supply for lcd v lcd table 9. power sequence 10% 0v 90% 90% 10% t 1 t 2 t 5 t 6 t 7 t 3 t 4 10% 10% valid data lamp on 0v 0ff 0ff
product specification 15 / 26 lc201v02 liquid crystal display ver. 0.1 jan. 17, 2003 4. optical specification optical characteristics are determined after the unit has been ? on ? for 30 minutes in a dark environment at 25 c. the values specified are at an approximate distance 50cm from the lcd surface at a viewing angle of f and q equal to 0 . fig. 1 presents additional information concerning the measuremen t equipment and method. table 10. optical characteristics ta= 25 c , v lcd =12.0v, f v =60hzdclk=25mhz, i bl =7ma 6 - gray scale 5p y axis, down ( f =270 ) y axis, up ( f =90 ) x axis, left ( f =180 ) x axis, right( f =0 ) 88 85 q d 88 85 q u 88 85 q l 5 degree 88 85 q r viewing angle (cr>10) white blue green red 0.583 gy 0.289 gx 0.090 by 0.143 bx 0.304 wy 0.289 wx decay time rise time 4 ms 25 15 - tr d 0.335 ry typ +0.03 0.629 typ - 0.03 rx color coordinates [cie1931] 4 ms 25 15 - tr r response time 3 1.3 d white luminance variation 2 cd/m 2 - 450 380 l wh surface luminance, white 1 notes units - 350 280 cr contrast ratio max typ min values symbol parameter 50cm fig. 1 optical characteristic measurement equipment and method optical stage(x,y) lcd module pritchard 880 or equivalent
product specification 16 / 26 lc201v02 liquid crystal display ver. 0.1 jan. 17, 2003 notes 1. contrast ratio(cr) is defined mathematically as : surface luminance with all white pixels contrast ratio = surface luminance with all black pixels it is measured at center point(1). 2. surface luminance is luminance value at center po int (1) across the lcd surface 50cm from the surface with all pixels displaying white . for more information see fig 2. 3. the variation in surface luminance , d white is defined as : d white(5p) = maximum(l on1 ,l on2 , l on3 , ...... , l on5 ) / minimum(l on1 ,l on2 , l on3 , ..... , l on5 ) where l on1 to l on5 are the luminance with all pixels displaying white at 5 location s 4. response time is the time required for the display to transit ion from black to white(rise time, tr r ) and from white to black(decay time, tr d ). for additional information see fig 3. 5. viewing angle is the angle at which the contrast r atio is greater than 10. the angles are determined for the horizontal or x axis and the vertical or y a xis with respect to the z axis which is normal to the lcd surface. for more information see fig 4. 6. gray scale specification gamma value is approximately 2.2. for more information see table 11. . 86.2 l239 100 l255 35.6 l159 43.5 l175 52.4 l191 62.6 l207 16.3 l111 21.8 l127 28.2 l143 74.1 l223 2.36 l47 4.72 l63 7.82 l79 11.7 l95 0.95 l31 0.42 l15 0.29 l0 luminance [%] (typ) gray level table 11. gray scale specification
product specification 17 / 26 lc201v02 liquid crystal display ver. 0.1 jan. 17, 2003 fig. 3 response time the response time is defined as the following figure and shall b e measured by switching the input signal for ? black ? and ? white ? . fig. 2 measure point for luminance measuring point for surface luminance & measuring point for lum inance variation tr r tr d 100 90 10 0 optical response white black black a : h / 4 mm b : v / 4 mm h : 408.0 mm v : 306.0 mm @ h,v : active area h a v b 3 4 2 1 5
product specification 18 / 26 lc201v02 liquid crystal display ver. 0.1 jan. 17, 2003 fig. 4 viewing angle dimension of viewing angle range normal y e f q f = 90 o , up f = 0 o , right f = 270 o , down f = 180 o , left
product specification 19 / 26 lc201v02 liquid crystal display ver. 0.1 jan. 17, 2003 5. mechanical characteristics the contents provide general mechanical characteristics. in addi tion the figures in the next page are detailed mechanical drawing of the lcd. 306.0 mm vertical hard coating(3h) anti - glare treatment of the front polarizer surface treatment 3200g (typ.),3360g(max) weight 311.0 mm vertical 331.5 mm vertical 25.0 mm depth 408.0 mm horizontal active display area 413.0 mm horizontal bezel area 432.0 mm horizontal outline dimension notes : please refer to a mechanic drawing in terms of tolerance at the next page.
product specification 20 / 26 lc201v02 liquid crystal display ver. 0.1 jan. 17, 2003
product specification 21 / 26 lc201v02 liquid crystal display ver. 0.1 jan. 17, 2003
product specification 22 / 26 lc201v02 liquid crystal display ver. 0.1 jan. 17, 2003 6. reliability environment test condition wave form : random vibration level : 1.0g rms bandwidth : 10 - 500hz duration : x,y,z, 20 min one time each direction vibration test (non - operating) 5 0 - 10,000 feet(3048m) 0 - 40,000 feet(12,192m) altitude operating storage / shipment 7 shock level : 100g waveform : half sine wave, 2ms direction : x, y, z one time each direction shock test (non - operating) 6 ta= 0 c 240h low temperature operation test 4 ta= 50 c 50%rh 240h high temperature operation test 3 ta= - 20 c 240h low temperature storage test 2 ta= 60 c 240h high temperature storage test 1 no test item condition
product specification 23 / 26 lc201v02 liquid crystal display ver. 0.1 jan. 17, 2003 7. international standards 7 - 1. safety a) ul 1950 third edition, underwriters laboratories, inc. jan. 2 8, 1995. standard for safety of information technology equipment includin g electrical business equipment. b) can/csa c22.2 no. 950 - 95 third edition, canadian standards association, jan. 28, 1995. standard for safety of information technology equipment includin g electrical business equipment. c) en 60950 : 1992+a1: 1993+a2: 1993+a3: 1995+a4: 1997+a11: 1997 iec 950 : 1991+a1: 1992+a2: 1993+a3: 1995+a4: 1996 european committee for electrotechnical standardization(cenelec) european standard for safety of information technology equipment including electrical business equipment. d)the standard for safety is required at the system sides e lsewhere. 7 - 2. emc a) ansi c63.4 ? methods of measurement of radio - noise emissions from low - voltage electrical and electrical equipment in the range of 9khz to 40ghz. ? american national standards institute(ansi), 1992 b) c.i.s.p.r ? limits and methods of measurement of radio interface characteris tics of information technology equipment. ?? international special committee on radio interference. c) en 55022 ? limits and methods of measurement of radio interface characteris tics of information technology equipment. ?? european committee for electrotechnical standardization.(cenele c), 1998
product specification 24 / 26 lc201v02 liquid crystal display ver. 0.1 jan. 17, 2003 8. packing 8 - 1. designation of lot mark a) lot mark a b c d e f g h i j k l m a,b,c : size d : year e : month f,g : panel code h : assembly code i,j,k,l,m : serial no. note 1. year b) location of lot mark 2. month serial no. is printed on the label. the label is attached to the backside of the lcd module. this is subject to change without prior notice. 8 - 2. packing form a) package quantity in one box : 3 pcs b) box size : 470mm 253mm 573mm 3. serial no. mark year 6 2006 2 2002 3 2003 4 2004 5 2005 0 2000 1 2001 7 9 8 7 2007 99 98 97 b nov mark month a oct 6 jun 7 jul 8 aug 9 sep 4 apr 5 may c 4 2 1 dec mar feb jan a0001 ~ a9999, ..... , z9999 00001 ~ 99999 mark 100000 ~ 1 ~ 99999 year
product specification 25 / 26 lc201v02 liquid crystal display ver. 0.1 jan. 17, 2003 9. precautions please pay attention to the followings when you use this tft lcd module. 9 - 1. mounting precautions (1) you must mount a module using holes arranged in four corners or four sides. (2) you should consider the mounting structure so that uneven fo rce (ex. twisted stress) is not applied to the module. and the case on which a module is mounted should have su fficient strength so that external force is not transmitted directly to the module. (3) please attach the surface transparent protective plate to th e surface in order to protect the polarizer. transparent protective plate should have sufficient strengt h in order to the resist external force. (4) you should adopt radiation structure to satisfy the temperat ure specification. (5) acetic acid type and chlorine type materials for the cover c ase are not desirable because the former generates corrosive gas of attacking the polarizer at high tempe rature and the latter causes circuit break by electro - chemical reaction. (6) do not touch, push or rub the exposed polarizers with glass, tweezers or anything harder than hb pencil lead. and please do not rub with dust clothes with c hemical treatment. do not touch the surface of polarizer for bare hand or grea sy cloth.(some cosmetics are detrimental to the polarizer.) (7) when the surface becomes dusty, please wipe gently with abso rbent cotton or other soft materials like chamois soaks with petroleum benzene. normal - hexane is recommended for cleaning the adhesives used to attach front / rear polarizers. do not use acetone, tolu ene and alcohol because they cause chemical damage to the polarizer. (8) wipe off saliva or water drops as soon as possible. their lo ng time contact with polarizer causes deformations and color fading. (9) do not open the case because inside circuits do not have suf ficient strength. 9 - 2. operating precautions (1) the spike noise causes the mis - operation of circuits. it should be lower than following voltage : v= 200mv(over and under shoot voltage) (2) response time depends on the temperature.(in lower temperatu re, it becomes longer.) (3) brightness depends on the temperature. (in lower temperature , it becomes lower.) and in lower temperature, response time(required time that brightness is stable after turned on) becomes longer. (4) be careful for condensation at sudden temperature change. co ndensation makes damage to polarizer or electrical contacted parts. and after fading condensation, smear or spot will occur. (5) when fixed patterns are displayed for a long time, remnant i mage is likely to occur. (6) module has high frequency circuits. sufficient suppression t o the electromagnetic interference shall be done by system manufacturers. grounding and shielding methods ma y be important to minimized the interference. (7) please do not give any mechanical and/or acoustical impact t o lcm. otherwise, lcm can not be operated its full characteristics perfectly. (8) a screw which is fastened up the steels should be a machine screw (if not, it causes metal foreign material and deal lcm a fatal blow) (9) please do not set lcd on its edge.
product specification 26 / 26 lc201v02 liquid crystal display ver. 0.1 jan. 17, 2003 since a module is composed of electronic circuits, it is not str ong to electrostatic discharge. make certain that treatment persons are connected to ground through wrist band etc . and don ? t touch interface pin directly. 9 - 3. electrostatic discharge control strong light exposure causes degradation of polarizer and color filter. 9 - 4. precautions for strong light exposure when storing modules as spares for a long time, the following p recautions are necessary. (1) store them in a dark place. do not expose the module to sunl ight or fluorescent light. keep the temperature between 5 c and 35 c at normal humidity. (2) the polarizer surface should not come in contact with any ot her object. it is recommended that they be stored in the container in w hich they were shipped. 9 - 5. storage 9 - 6. handling precautions for protection film (1) the protection film is attached to the bezel with a small m asking tape . when the protection film is peeled off, static electricity is generated between the film and polarizer. this should be peeled off slowly and carefully by people wh o are electrically grounded and with well ion - blown equipment or in such a condition, etc. (2) when the module with protection film attached is stored for a long time, sometimes there remains a very small amount of glue still on the bezel after the prot ection film is peeled off. (3) you can remove the glue easily. when the glue remains on the bezel surface or its vestige is recognized, please wipe them off with absorbent cotton wast e or other soft material like chamois soaked with normal - hexane.

▲Up To Search▲

Price & Availability of LC201V02-A3

	To Download LC201V02-A3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .